Cisco Firepower 1120 Panduan Pemasangan Perangkat Keras - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pemasangan Perangkat Keras untuk Server Cisco Firepower 1120. Cisco Firepower 1120 30 halaman. Connected grid router
Juga untuk Cisco Firepower 1120: Panduan Instalasi (6 halaman), Panduan Memulai Cepat (10 halaman), Manual (6 halaman), Panduan Pemasangan Perangkat Keras (42 halaman), Panduan Penyebaran (8 halaman), Memulai (42 halaman), Panduan Pemasangan Perangkat Keras (42 halaman)

Halaman Cetak
Cisco Firepower 1120 Panduan Pemasangan Perangkat Keras

Hardware Specifications

3
5
7
Hardware Specifications
The following table contains hardware specifications for the Firepower 1100 series.
Table 2: Firepower 1100 Series Hardware Specifications
Specification
Dimensions (H x W x D)
Weight
Cisco Firepower 1100 Series Hardware Installation Guide
8
SFP
Status of the SFP transceiver.
Link status (L):
• Off—No SFP.
• Amber—SFP present, but no link.
• Green, flashing—Link established and
transmitting.
Status
System operating status:
• Green—Normal system function.
• Amber—Critical alarm indicating one
or more of the following:
• Major failure of a hardware or
software component.
• Over-temperature condition.
• Power voltage outside the tolerance
range.
SSD
Status of the SSD:
• Off— No SSD present or no activity on
the SSD.
• Green—Activity on the SSD.
Note
See
Replace the SSD , on page
25
for the procedure for replacing
a failed SSD.
1120
17.2 in. x 10.58 in. x 1.72 in. (43.69 x 26.87 x 4.37 cm)
8 lb (3.63 kg)
4
Power
Power supply status:
• Off —Power supply off.
• Green—Power supply on.
Active
6
Status of the failover pair:
• Off— Failover is not operational.
• Green—Failover pair operating
normally. The LED is green always
unless the chassis in a high availability
pair.
• Amber—When the chassis is in a high
availability pair, the LED is amber for
the standby unit.
1140
Overview