Epson Personal Document Station Panduan Memulai - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Pemindai Epson Personal Document Station. Epson Personal Document Station 19 halaman. Grayscale scanner

Halaman Cetak

Carefully remove the interface board from its packaging,

holding it only by its top edges. Then place it on a flat,

clean surface.

Locate jumpers J1 and J2 on the interface board, as shown

below.

The settings are printed on the circuit board next to the

jumpers. To change a setting, lift off the jumper cap and

reinstall it over the appropriate pair of pins.

Caution:

Be careful not to bend the jumper pins.

4 Getting Started

Caution:

Avoid touching the components or the gold contacts on the

interface board; they can be damaged by static electricity.

1 2 3

0 000