Epson Personal Document Station 시작하기 매뉴얼 - 페이지 6

{카테고리_이름} Epson Personal Document Station에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Personal Document Station 19 페이지. Grayscale scanner

Carefully remove the interface board from its packaging,

holding it only by its top edges. Then place it on a flat,

clean surface.

Locate jumpers J1 and J2 on the interface board, as shown

below.

The settings are printed on the circuit board next to the

jumpers. To change a setting, lift off the jumper cap and

reinstall it over the appropriate pair of pins.

Caution:

Be careful not to bend the jumper pins.

4 Getting Started

Caution:

Avoid touching the components or the gold contacts on the

interface board; they can be damaged by static electricity.

1 2 3

0 000