- ページ 6

スキャナー Epson Personal Document StationのPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Epson Personal Document Station 19 ページ。 Grayscale scanner

Carefully remove the interface board from its packaging,
holding it only by its top edges. Then place it on a flat,
clean surface.
Locate jumpers J1 and J2 on the interface board, as shown
below.
The settings are printed on the circuit board next to the
jumpers. To change a setting, lift off the jumper cap and
reinstall it over the appropriate pair of pins.
Caution:
Be careful not to bend the jumper pins.
4 Getting Started
Caution:
Avoid touching the components or the gold contacts on the
interface board; they can be damaged by static electricity.
1 2 3
0 000