Epson 6110i - PowerLite XGA LCD Projector Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat lunak Epson 6110i - PowerLite XGA LCD Projector. Epson 6110i - PowerLite XGA LCD Projector 17 halaman. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Juga untuk Epson 6110i - PowerLite XGA LCD Projector: Panduan Pengguna (42 halaman), Panduan Pengoperasian (36 halaman), Panduan Pengoperasian (47 halaman), Spesifikasi (2 halaman), Panduan Tambahan (1 halaman), Panduan Pengaturan Cepat (7 halaman), Panduan Pengguna (1 halaman), Daftar Bagian (1 halaman), Pernyataan Kesesuaian (4 halaman), Buletin Dukungan Produk (25 halaman), Buletin Dukungan Produk (22 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (41 halaman), Buletin Dukungan Produk (15 halaman), Buletin Dukungan Produk (22 halaman)

Halaman Cetak

Epson 6110i - PowerLite XGA LCD Projector Panduan Pengguna

Using the Remote Control

The remote control uses a line-of-sight infrared signal. It lets

you access the projector's features from anywhere in the

room—up to 19.7 feet (6 meters) away. (This distance may be

shorter if the remote control batteries are low.)

If the projector does not respond to remote control

commands, check the following:

❏ If you're using the remote control for the first time, make

sure the batteries are installed.

❏ The remote control's batteries may not be installed correctly

or may be low on power. To change the batteries, see

"Replacing Remote Control Batteries" in the next column.

❏ Make sure you are within 19.7 feet (6 meters) of the

projector, and within range of the projector's front or back

sensor (approximately 30° to the left or right and 15° above

or below).

❏ Dim the room lights and turn off any fluorescent lights.

Make sure the projector is not in direct sunlight. Strong

lighting, especially fluorescent lights, may affect the

projector's infrared receivers. Also, turn off any nearby

equipment that emits infrared energy, such as a radiant

room heater.

❏ Make sure the projector's remote receivers aren't turned off

in the projector's Settings menu. (See the User's Guide for

more information.)

Using the Navigation Buttons

The remote control has various buttons that let you navigate

the projector's help and menu systems; they also let you use

the drawing tools to highlight your presentation.

Enter button

Pointer button

(controls pointer

movement)

Esc button

Note: The projector has

equivalent buttons that you can

use on its control panel:

Replacing Remote Control Batteries

When the batteries run out, follow the steps below to replace

them. The remote control requires two AAA alkaline batteries.

Note: The remote control automatically shuts off when it detects a

button being pressed for more than 60 seconds. This conserves

battery life. It can be helpful, for example, when the remote is in a

carrying case and the Power button is accidentally pushed.

Caution: When replacing batteries, take the following precautions:

❏

Replace the batteries as soon as they run out. If a battery leaks,

wipe away the battery fluid with a soft cloth. If fluid gets on your

hands, wash them immediately.

❏

Do not expose batteries to heat or flame.

❏

Dispose of used batteries according to local regulations.

❏

Remove the batteries if you won't be using the remote control

for a long period of time.

1. Press in the tab and lift to remove the battery cover.

2. Remove the old batteries, then insert the new ones as

shown.

12/07

Epson PowerLite 6110i

Esc

button

Arrow buttons

Enter button