AER Lily one Panduan Instalasi - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Aksesori Untuk Instrumen Musik AER Lily one. AER Lily one 12 halaman. Twin source rechargeable pick up system for acoustic instruments
Juga untuk AER Lily one: Mulai Cepat (3 halaman)
Halaman CetakChecklist
Check the contents of the package to make
sure everything is complete:
1 x Lily one piezo pick-up with 2.5 mm jack
•
1 x Lily one endpin preamp with integrated
•
microphone, soundhole control (SHC)
with installed battery
•
1 x adhesive tape for SHC
•
3 x cable clamps
•
Manual/Instruction guide
•
1,5 m USB-Jack charging cable
1. General requirements
•
Check the string spacing, centre to centre
of the string, or middle between a pair, to
make sure it matches Lily one.
•
Make sure that the saddle has a minimum
width of 2,3 mm. The undersaddle pickup
is 2,3 mm wide.
•
Check the string pressure on the pickup
crystal by assuring a minimum 20° break
angle, if more all the better. If your instrument
does not provide this, the string slots
will need ramping (done by a luthier).
•
Fitting the Lily one soundhole control (SHC)
•
Check the inside of the guitar to identify
the ideal position for the Lily one SHC on the
bass side of the soundhole for easy operation
while performing.
•
Bracing around the soundhole differs
between makers and can conflict with the
control unit. Some guitar constructions requi-
re an underlay to glue the SHC on properly. In
any case should the gluing surface be flat and
free of dust or grease.