- ページ 3

楽器アクセサリー AER Lily oneのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。AER Lily one 12 ページ。 Twin source rechargeable pick up system for acoustic instruments
AER Lily one にも：クイックスタート (3 ページ)

ページを印刷する

Checklist

Check the contents of the package to make

sure everything is complete:

1 x Lily one piezo pick-up with 2.5 mm jack

•

1 x Lily one endpin preamp with integrated

•

microphone, soundhole control (SHC)

with installed battery

•

1 x adhesive tape for SHC

•

3 x cable clamps

•

Manual/Instruction guide

•

1,5 m USB-Jack charging cable

1. General requirements

•

Check the string spacing, centre to centre

of the string, or middle between a pair, to

make sure it matches Lily one.

•

Make sure that the saddle has a minimum

width of 2,3 mm. The undersaddle pickup

is 2,3 mm wide.

•

Check the string pressure on the pickup

crystal by assuring a minimum 20° break

angle, if more all the better. If your instrument

does not provide this, the string slots

will need ramping (done by a luthier).

•

Fitting the Lily one soundhole control (SHC)

•

Check the inside of the guitar to identify

the ideal position for the Lily one SHC on the

bass side of the soundhole for easy operation

while performing.

•

Bracing around the soundhole differs

between makers and can conflict with the

control unit. Some guitar constructions requi-

re an underlay to glue the SHC on properly. In

any case should the gluing surface be flat and

free of dust or grease.