Xerox Phaser 750DX Panduan Servis - Halaman 31

Jelajahi secara online atau unduh pdf Panduan Servis untuk Aksesori Printer Xerox Phaser 750DX. Xerox Phaser 750DX 40 halaman. Digital color printer / copier
Juga untuk Xerox Phaser 750DX: Spesifikasi (2 halaman), Brosur & Spesifikasi (4 halaman), Panduan Referensi (8 halaman), Manual (9 halaman)

Halaman Cetak
Xerox Phaser 750DX Panduan Servis
Status
Code
10-363
The control logic sensed that the Heat Roll did not return to operating temperature after a job run.
Initial action:
Ensure that the Heat Roll surface is clean (no debris, paper, etc.) (REP 5.31)
Check the Heat Roll Control Thermistor for cleanliness, damage and excessive wear at the point where the
Thermistor contacts the Heat Roll (REP 5.37).
If the problem still exists:
Place a service call.
10-364
The control logic sensed that the Heat Roll could not maintain temperature during a copy run.
Initial action:
Ensure that the Heat Roll surface is clean (no debris, paper, etc.) (REP 5.31)
Check the Heat Roll Control Thermistor for cleanliness, damage and excessive wear at the point where the
Thermistor contacts the Heat Roll (REP 5.37).
If the problem still exists:
Place a service call.
10-365
The control logic sensed that the Heat Roll did not reach operating temperature within 150 seconds after Power
Saver mode was exited.
Initial action:
Ensure that the Heat Roll surface is clean (no debris, paper, etc.) (REP 5.31)
Check the Heat Roll Control Thermistor for cleanliness, damage and excessive wear at the point where the
Thermistor contacts the Heat Roll (REP 5.37).
If the problem still exists:
Place a service call.
5750 DocuCare Service Manual
Description/Direction
5/98
2-31
Fault Code Procedures