Xerox 850DX - Phaser Color Solid Ink Printer Panduan Petunjuk Pembersihan - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pembersihan untuk Perangkat lunak Xerox 850DX - Phaser Color Solid Ink Printer. Xerox 850DX - Phaser Color Solid Ink Printer 9 halaman. Installation guide for accxes 10.2
Juga untuk Xerox 850DX - Phaser Color Solid Ink Printer: Spesifikasi (2 halaman), Panduan Operator (16 halaman), Panduan Tambahan (1 halaman), Panduan Tambahan (11 halaman), Setup Manual (1 halaman), Panduan Tambahan (26 halaman), Catatan Rilis (33 halaman), Catatan Rilis (11 halaman), Catatan Rilis (11 halaman), Petunjuk Instalasi (2 halaman)

Cleaning Phaser® 850 Printers

Cleaning for ink smears or jams: paper-exit path

Clean the paper-exit path if media feeds improperly, or if prints have ink smears.

Caution

To avoid damaging the print drum and rapid release guide, never use any sharp objects in

this area, or scrape excess ink with a tool or fingernail.

Open the exit cover.

To clean the rubber exit rollers:

Wrap an alcohol-soaked wipe around the index finger of one hand.

Press your wipe-covered finger against each roller.

Move the thumbwheel to turn the rollers. Rotate the rollers four or five complete revolutions

for each roller segment to ensure proper cleaning.

Note

You may notice some staining of the exit rollers while performing

the cleaning procedure; this is normal and does not indicate

additional cleaning is necessary. Simply clean rollers to remove

any build-up of ink.

To clean the two sets of ribbed exit guides under the exit cover, gently wipe the raised ribs using

an alcohol-soaked wipe.

9103-15

9103-17

Phaser 850 Color Printer