Xerox 850DX - Phaser Color Solid Ink Printer Panduan Petunjuk Pembersihan - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pembersihan untuk Perangkat lunak Xerox 850DX - Phaser Color Solid Ink Printer. Xerox 850DX - Phaser Color Solid Ink Printer 9 halaman. Installation guide for accxes 10.2
Juga untuk Xerox 850DX - Phaser Color Solid Ink Printer: Spesifikasi (2 halaman), Panduan Operator (16 halaman), Panduan Tambahan (1 halaman), Panduan Tambahan (11 halaman), Setup Manual (1 halaman), Panduan Tambahan (26 halaman), Catatan Rilis (33 halaman), Catatan Rilis (11 halaman), Catatan Rilis (11 halaman), Petunjuk Instalasi (2 halaman)

Cleaning Phaser® 850 Printers

Cleaning for ink smears or jams: paper-feed rollers

Clean the paper-feed rollers if media feeds improperly, or if prints have ink smears.

Caution

Hot surfaces exist behind the middle paper-feed rollers. To avoid personal injury during

cleaning procedures, do not reach in behind these rollers.

Open the front cover.

Remove the maintenance drawer (A) from the printer.

The upper paper-feed rollers are located above the slot for the maintenance drawer (A). To clean

these rollers:

Place a prepackaged alcohol-soaked wipe against each upper rubber roller, pressing to create

pressure against the roller.

Use the thumbwheel to turn the upper rollers. The upper rubber rollers should rotate four or

five complete revolutions for each roller segment to ensure proper cleaning. Scrub each roller

thoroughly. If the wipe becomes dirty, discard it and use another.

To clean the middle rubber feed roller behind the metal plate:

Place a prepackaged alcohol-soaked wipe against the underside of each middle roller.

Using your hand, rotate the middle roller.

9103-10

Phaser 850 Color Printer

0580-1