Xerox 850DX - Phaser Color Solid Ink Printer Panduan Petunjuk Pembersihan - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pembersihan untuk Perangkat lunak Xerox 850DX - Phaser Color Solid Ink Printer. Xerox 850DX - Phaser Color Solid Ink Printer 9 halaman. Installation guide for accxes 10.2
Juga untuk Xerox 850DX - Phaser Color Solid Ink Printer: Spesifikasi (2 halaman), Panduan Operator (16 halaman), Panduan Tambahan (1 halaman), Panduan Tambahan (11 halaman), Setup Manual (1 halaman), Panduan Tambahan (26 halaman), Catatan Rilis (33 halaman), Catatan Rilis (11 halaman), Catatan Rilis (11 halaman), Petunjuk Instalasi (2 halaman)

Scrub each roller thoroughly. If the wipe becomes dirty, discard it and use another.

The lower paper-feed rollers are located below the maintenance drawer (A): one set of rollers is

black rubber; the other set is white plastic. To clean the lower rollers:

Place and hold a prepackaged alcohol-soaked wipe on top of the white and black rollers.

Move the thumbwheel to turn the rollers. Rotate the rollers four or five complete revolutions

for each roller segment to ensure proper cleaning.

Scrub each roller thoroughly until clean. If the wipe becomes dirty, discard it and use

another.

To clean the shiny metal surface, use a prepackaged alcohol-soaked wipe.

Put the maintenance drawer (A) back into the printer, and close the front cover.

Cleaning Instructions

Cleaning Phaser® 850 Printers

9103-11

9103-12

0643-165