Xerox 850DX - Phaser Color Solid Ink Printer Panduan Petunjuk Pembersihan - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pembersihan untuk Perangkat lunak Xerox 850DX - Phaser Color Solid Ink Printer. Xerox 850DX - Phaser Color Solid Ink Printer 9 halaman. Installation guide for accxes 10.2
Juga untuk Xerox 850DX - Phaser Color Solid Ink Printer: Spesifikasi (2 halaman), Panduan Operator (16 halaman), Panduan Tambahan (1 halaman), Panduan Tambahan (11 halaman), Setup Manual (1 halaman), Panduan Tambahan (26 halaman), Catatan Rilis (33 halaman), Catatan Rilis (11 halaman), Catatan Rilis (11 halaman), Petunjuk Instalasi (2 halaman)

Cleaning Phaser

The printer should be cleaned when prints have oily streaks, stray ink or smeared ink. Cleaning may

also be needed when paper is not picking reliably from the paper tray, or the pick and feed rollers are

visibly dirty. How often you need to clean the printer depends on how heavily the printer is used and

the environment in which it is used. Less frequent cleaning is required when high quality, laser bond

paper is used for printing.

Use the following procedures if the printer's automated paper path cleaning procedure — located in

the Troubleshooting menu, "Remove Ink Smears," — fails to resolve the problem.

Cleaning supplies

The cleaning kit contains presoaked alcohol wipes that are recommended for cleaning the printer.

If you purchase isopropyl alcohol, always use alcohol that is at least 90% pure; alcohol that has

additives can damage the printer.

Warning

Alcohol is flammable; keep alcohol-soaked wipes away from hot surfaces.

Open the front cover.

Remove the maintenance drawer (A) from the printer.

Use a lint-free wipe to gently wipe any excess debris from the clear plastic wiper blade.

Reinsert the maintenance drawer into the printer.

Cleaning Instructions

850 Printers

0379-08

Cleaning Phaser® 850 Printers

0580-1