Xerox Phaser 7300DN Manual Kertas - Halaman 13

Jelajahi secara online atau unduh pdf Manual Kertas untuk Perangkat lunak Xerox Phaser 7300DN. Xerox Phaser 7300DN 34 halaman. Quick reference guide
Juga untuk Xerox Phaser 7300DN: Panduan Pemecahan Masalah (40 halaman), Fitur (1 halaman), Brosur & Spesifikasi (4 halaman), Panduan Pengguna (50 halaman), Panduan Fitur (40 halaman), Manual Dukungan (28 halaman), Setup Manual (18 halaman), Panduan Penyiapan dan Referensi Cepat (45 halaman)

When the front panel prompts you and you haven't changed the type or size of paper, press the

OK key to accept the current settings for type and size.

If you have changed the type or size of paper:

On the printer's front panel, scroll to

the OK key.

Scroll to the correct paper type and press the OK key to save your selection.

Scroll to the correct paper size and press the OK key to save your selection.

Using custom size paper

In addition to the wide variety of paper sizes available for this printer, you can use custom size paper.

Depending on the size, custom size paper can be loaded in Tray 1 or the Multi-Purpose Tray (as

described on page 11).

X dimension

Y dimension

Note

After you load a custom size paper in any of this printer's trays, you MUST set the front

panel values to agree with the paper you have loaded.

Note

Banner paper (paper over 18 inches (450 mm) long must be loaded into the Multi-Purpose

Tray. You MUST use the Left Side Output Tray for output. See "Output Trays" on page 26.

Phaser® 7300 Color Printer

Change

Tray 1

148 mm - 328 mm

5.83 in. - 12.60 in.

148 mm - 457 mm

5.83 in. - 18 in.

(by pressing the Down Arrow key) and press

6200-45

Multi-Purpose Tray

105 mm - 328 mm

4.13 in. - 12.60 in.

148 mm - 914 mm

5.83 in. - 36 in.

Trays