Xerox Phaser 7300DN 종이 매뉴얼 - 페이지 13

{카테고리_이름} Xerox Phaser 7300DN에 대한 종이 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Phaser 7300DN 34 페이지. Quick reference guide
Xerox Phaser 7300DN에 대해서도 마찬가지입니다: 문제 해결 매뉴얼 (40 페이지), 특징 (1 페이지), 브로셔 및 사양 (4 페이지), 사용자 설명서 (50 페이지), 기능 설명서 (40 페이지), 지원 매뉴얼 (28 페이지), 설정 매뉴얼 (18 페이지), 설정 및 빠른 참조 매뉴얼 (45 페이지)

When the front panel prompts you and you haven't changed the type or size of paper, press the

OK key to accept the current settings for type and size.

If you have changed the type or size of paper:

On the printer's front panel, scroll to

the OK key.

Scroll to the correct paper type and press the OK key to save your selection.

Scroll to the correct paper size and press the OK key to save your selection.

Using custom size paper

In addition to the wide variety of paper sizes available for this printer, you can use custom size paper.

Depending on the size, custom size paper can be loaded in Tray 1 or the Multi-Purpose Tray (as

described on page 11).

X dimension

Y dimension

Note

After you load a custom size paper in any of this printer's trays, you MUST set the front

panel values to agree with the paper you have loaded.

Note

Banner paper (paper over 18 inches (450 mm) long must be loaded into the Multi-Purpose

Tray. You MUST use the Left Side Output Tray for output. See "Output Trays" on page 26.

Phaser® 7300 Color Printer

Change

Tray 1

148 mm - 328 mm

5.83 in. - 12.60 in.

148 mm - 457 mm

5.83 in. - 18 in.

(by pressing the Down Arrow key) and press

6200-45

Multi-Purpose Tray

105 mm - 328 mm

4.13 in. - 12.60 in.

148 mm - 914 mm

5.83 in. - 36 in.

Trays