Clark Synthesis TACTILE SOUND AW339 Panduan Instalasi - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Transduser Clark Synthesis TACTILE SOUND AW339. Clark Synthesis TACTILE SOUND AW339 20 halaman. All-weather transducer
Juga untuk Clark Synthesis TACTILE SOUND AW339: Panduan Tambahan (4 halaman), Lembar data (1 halaman), Panduan Instalasi (8 halaman), Panduan Instalasi (2 halaman), Panduan Pembeli (2 halaman), Lembar Spesifikasi (1 halaman)

Halaman Cetak
One of the best materials for carrying tactile vibrations is wood.
In most applications, the TST should be centrally located on
the structure (chair, floor, riser, deck, etc.) in order to evenly
distribute the tactile effect. When two or more TSTs are used
on one structure, they should be spaced equidistant from each
other and the edges/boundaries of the structure. Mounting to a
bridge, joist, or frame member is preferred.
NOTE: The TST329 and AW339 Transducers are designed to be mounted in any
orientation. The TST239 and TST429 transducers are designed to be mounted in
a horizontal orientation ONLY.
Correct for all
Transducers
www.clarksynthesis.com
General Location Diagram
Transducer mounted to chair frame
Transducer mounted inside platform or riser
Correct for all
Transducers

General Information

Transducer mounted beneath floor
Correct for TST329 and
AW339 Transducers ONLY
Tactile Sound Transducers
5