Clark Synthesis TACTILE SOUND AW339 설치 매뉴얼 - 페이지 5
{카테고리_이름} Clark Synthesis TACTILE SOUND AW339에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clark Synthesis TACTILE SOUND AW339 20 페이지. All-weather transducer
Clark Synthesis TACTILE SOUND AW339에 대해서도 마찬가지입니다: 보충 설명서 (4 페이지), 데이터시트 (1 페이지), 설치 매뉴얼 (8 페이지), 설치 매뉴얼 (2 페이지), 구매자 매뉴얼 (2 페이지), 사양 시트 (1 페이지)
페이지 인쇄One of the best materials for carrying tactile vibrations is wood.
In most applications, the TST should be centrally located on
the structure (chair, floor, riser, deck, etc.) in order to evenly
distribute the tactile effect. When two or more TSTs are used
on one structure, they should be spaced equidistant from each
other and the edges/boundaries of the structure. Mounting to a
bridge, joist, or frame member is preferred.
NOTE: The TST329 and AW339 Transducers are designed to be mounted in any
orientation. The TST239 and TST429 transducers are designed to be mounted in
a horizontal orientation ONLY.
Correct for all
Transducers
www.clarksynthesis.com
General Location Diagram
Transducer mounted to chair frame
Transducer mounted inside platform or riser
Correct for all
Transducers
General Information
Transducer mounted beneath floor
Correct for TST329 and
AW339 Transducers ONLY
Tactile Sound Transducers
5