Clark Synthesis TACTILE SOUND AW339 Installation Manual - Page 5

Browse online or download pdf Installation Manual for Transducer Clark Synthesis TACTILE SOUND AW339. Clark Synthesis TACTILE SOUND AW339 20 pages. All-weather transducer
Also for Clark Synthesis TACTILE SOUND AW339: Supplementary Manual (4 pages), Datasheet (1 pages), Installation Manual (8 pages), Installation Manual (2 pages), Buyer's Manual (2 pages), Specification Sheet (1 pages)

Print Page
One of the best materials for carrying tactile vibrations is wood.
In most applications, the TST should be centrally located on
the structure (chair, floor, riser, deck, etc.) in order to evenly
distribute the tactile effect. When two or more TSTs are used
on one structure, they should be spaced equidistant from each
other and the edges/boundaries of the structure. Mounting to a
bridge, joist, or frame member is preferred.
NOTE: The TST329 and AW339 Transducers are designed to be mounted in any
orientation. The TST239 and TST429 transducers are designed to be mounted in
a horizontal orientation ONLY.
Correct for all
Transducers
www.clarksynthesis.com
General Location Diagram
Transducer mounted to chair frame
Transducer mounted inside platform or riser
Correct for all
Transducers

General Information

Transducer mounted beneath floor
Correct for TST329 and
AW339 Transducers ONLY
Tactile Sound Transducers
5