3D AEROWORKS FUN JET X-88 Panduan Perakitan dan Panduan Pengguna - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Perakitan dan Panduan Pengguna untuk Mainan 3D AEROWORKS FUN JET X-88. 3D AEROWORKS FUN JET X-88 18 halaman.
Halaman Cetak
5
Fit and glue the outer section of the wing to the already assembled inner section and vertical
stabiliser. The carbon or pine main spar should be test fit before gluing.
6
Glue the aileron sections together. Insert the hinges into the ailerons and test fit the aileron to
the wing.
NOTE: The hinge length may need to be trimmed slightly if it does not seat all the way into
the hinge slot.
7a (RDS option)
-
Cut two 110mm lengths of 2mm push rod and bend according to the images below.
TOP VIEW
Left side
Right side