3D AEROWORKS FUN JET X-88 Montaj Kılavuzu ve Kullanım Kılavuzu - Sayfa 9
Oyuncak 3D AEROWORKS FUN JET X-88 için çevrimiçi göz atın veya pdf Montaj Kılavuzu ve Kullanım Kılavuzu indirin. 3D AEROWORKS FUN JET X-88 18 sayfaları.
Sayfayı Yazdır
5
Fit and glue the outer section of the wing to the already assembled inner section and vertical
stabiliser. The carbon or pine main spar should be test fit before gluing.
6
Glue the aileron sections together. Insert the hinges into the ailerons and test fit the aileron to
the wing.
NOTE: The hinge length may need to be trimmed slightly if it does not seat all the way into
the hinge slot.
7a (RDS option)
-
Cut two 110mm lengths of 2mm push rod and bend according to the images below.
TOP VIEW
Left side
Right side