3D AEROWORKS FUN JET X-88 조립 설명서 및 사용자 설명서 - 페이지 9
{카테고리_이름} 3D AEROWORKS FUN JET X-88에 대한 조립 설명서 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D AEROWORKS FUN JET X-88 18 페이지.
페이지 인쇄
5
Fit and glue the outer section of the wing to the already assembled inner section and vertical
stabiliser. The carbon or pine main spar should be test fit before gluing.
6
Glue the aileron sections together. Insert the hinges into the ailerons and test fit the aileron to
the wing.
NOTE: The hinge length may need to be trimmed slightly if it does not seat all the way into
the hinge slot.
7a (RDS option)
-
Cut two 110mm lengths of 2mm push rod and bend according to the images below.
TOP VIEW
Left side
Right side