3D Gadgets MAGBOT DE-10 Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Printer 3D 3D Gadgets MAGBOT DE-10. 3D Gadgets MAGBOT DE-10 16 halaman.

Halaman Cetak

Leveling the bed

Adjust the leveling screws to
level the print bed.
1. Touch the 'level' icon on the touch LCD then select 'FIRST'
Cut a small piece of paper from the A4 paper and slide it in
between the nozzle and the print bed, adjust the nut until there is
slight resistance on the paper from the nozzle while moving the
paper.
2. Repeat the same step for 'SECOND' , 'THIRD' and 'FOURTH'
location.
3. Once you have finished repeat the whole process at least
once to ensure the print bed is levered correctly.
7