3D Gadgets MAGBOT DE-10 Посібник користувача - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник користувача для 3D-принтери 3D Gadgets MAGBOT DE-10. 3D Gadgets MAGBOT DE-10 16 сторінок.

Друкувати сторінку

Leveling the bed

Adjust the leveling screws to
level the print bed.
1. Touch the 'level' icon on the touch LCD then select 'FIRST'
Cut a small piece of paper from the A4 paper and slide it in
between the nozzle and the print bed, adjust the nut until there is
slight resistance on the paper from the nozzle while moving the
paper.
2. Repeat the same step for 'SECOND' , 'THIRD' and 'FOURTH'
location.
3. Once you have finished repeat the whole process at least
once to ensure the print bed is levered correctly.
7