3D Gadgets MAGBOT DE-10 Kullanıcı Kılavuzu - Sayfa 7

3D Yazıcılar 3D Gadgets MAGBOT DE-10 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. 3D Gadgets MAGBOT DE-10 16 sayfaları.

Leveling the bed

Adjust the leveling screws to

level the print bed.

1. Touch the 'level' icon on the touch LCD then select 'FIRST'

Cut a small piece of paper from the A4 paper and slide it in

between the nozzle and the print bed, adjust the nut until there is

slight resistance on the paper from the nozzle while moving the

paper.

2. Repeat the same step for 'SECOND' , 'THIRD' and 'FOURTH'

location.

3. Once you have finished repeat the whole process at least

once to ensure the print bed is levered correctly.