Arometrix Extraction Finder Panduan Pengguna - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Laboratorium Arometrix Extraction Finder. Arometrix Extraction Finder 14 halaman.
Juga untuk Arometrix Extraction Finder: Panduan Memulai Cepat (2 halaman), Panduan Pengguna (20 halaman)
Halaman Cetak
b. Set Scans to Average: 5
c. Ensure that the Device Status and Server Status indicator on the bottom left-hand side of
the display are green – If not, make sure the cords are properly connected.
d. Ensure that the "Light On/Light Off" toggle button is turned on. The light above it should
be green.
e. To set ranges, go to Settings, select "Wavelength Settings" to track specific molecules. For
extraction, we recommend setting:
i.
Region 1: Delta-9 (or CBD Indicator)
ii.
Region 2: Lipids
iii.
Region 3: Chlorophyll
iv.
Pro-tip: Once you return back to the homescreen, check each region's checkbox for
easier tracking during the process.
5. Record on (optional) at the start of the run: Toggle the Record button to On. Ensure the Record
indicator is green.
6. Once the Extraction Finder system is safely in operation, prepare extraction as you typically would.
Arometrix, Inc.
arometrix.com/resources
6