Arometrix Extraction Finder User Manual - Page 6

Browse online or download pdf User Manual for Laboratory Equipment Arometrix Extraction Finder. Arometrix Extraction Finder 14 pages.
Also for Arometrix Extraction Finder: Quick Start Manual (2 pages), User Manual (20 pages)

Print Page

b. Set Scans to Average: 5

c. Ensure that the Device Status and Server Status indicator on the bottom left-hand side of

the display are green – If not, make sure the cords are properly connected.

d. Ensure that the "Light On/Light Off" toggle button is turned on. The light above it should

be green.

e. To set ranges, go to Settings, select "Wavelength Settings" to track specific molecules. For

extraction, we recommend setting:

Region 1: Delta-9 (or CBD Indicator)

ii.

Region 2: Lipids

iii.

Region 3: Chlorophyll

iv.

Pro-tip: Once you return back to the homescreen, check each region's checkbox for

easier tracking during the process.

5. Record on (optional) at the start of the run: Toggle the Record button to On. Ensure the Record

indicator is green.

6. Once the Extraction Finder system is safely in operation, prepare extraction as you typically would.

Arometrix, Inc.

[email protected]

arometrix.com/resources