Arometrix Extraction Finder 사용자 설명서 - 페이지 6

{카테고리_이름} Arometrix Extraction Finder에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Arometrix Extraction Finder 14 페이지.
Arometrix Extraction Finder에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 사용자 설명서 (20 페이지)

페이지 인쇄

b. Set Scans to Average: 5

c. Ensure that the Device Status and Server Status indicator on the bottom left-hand side of

the display are green – If not, make sure the cords are properly connected.

d. Ensure that the "Light On/Light Off" toggle button is turned on. The light above it should

be green.

e. To set ranges, go to Settings, select "Wavelength Settings" to track specific molecules. For

extraction, we recommend setting:

Region 1: Delta-9 (or CBD Indicator)

ii.

Region 2: Lipids

iii.

Region 3: Chlorophyll

iv.

Pro-tip: Once you return back to the homescreen, check each region's checkbox for

easier tracking during the process.

5. Record on (optional) at the start of the run: Toggle the Record button to On. Ensure the Record

indicator is green.

6. Once the Extraction Finder system is safely in operation, prepare extraction as you typically would.

Arometrix, Inc.

[email protected]

arometrix.com/resources