3DHobbyShop.com Vyper 46" ARF Panduan Perakitan - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Perakitan untuk Mainan 3DHobbyShop.com Vyper 46" ARF. 3DHobbyShop.com Vyper 46" ARF 19 halaman.

Please examine the pull-pull system assembly diagram closely:

When attaching the servo connectors to the arm, do not tighten the nut fully, but leave it a bit loose so the

connectors can rotate freely. Use a drop of CA glue on the nut to prevent it from loosening in flight.

Start by attaching the cables to the pull-wire end. Crimp well, preferably by making creases in the crimp

tube with a sharp pliers or cutters, rather than smashing it completely flat. Apply a drop of thin ca to the

completed crimp to prevent it from sliding on the cable.