3DHobbyShop.com Vyper 46" ARF Montagehandleiding - Pagina 13

Blader online of download pdf Montagehandleiding voor {categorie_naam} 3DHobbyShop.com Vyper 46" ARF. 3DHobbyShop.com Vyper 46" ARF 19 pagina's.

3DHobbyShop.com Vyper 46
13
Please examine the pull-pull system assembly diagram closely:
When attaching the servo connectors to the arm, do not tighten the nut fully, but leave it a bit loose so the
connectors can rotate freely. Use a drop of CA glue on the nut to prevent it from loosening in flight.
Start by attaching the cables to the pull-wire end. Crimp well, preferably by making creases in the crimp
tube with a sharp pliers or cutters, rather than smashing it completely flat. Apply a drop of thin ca to the
completed crimp to prevent it from sliding on the cable.