3DHobbyShop.com Vyper 46" ARF Montagehandleiding - Pagina 12

Blader online of download pdf Montagehandleiding voor {categorie_naam} 3DHobbyShop.com Vyper 46" ARF. 3DHobbyShop.com Vyper 46" ARF 19 pagina's.

NOTE – RUDDER SERVO LOCATION

The Vyper can use two types of power systems, lightweight 3S lipo systems and heavier 4S lipo

systems. For the lighter 3S systems, use the pull-pull rudder system with the servo mounted

under the canopy. For heavier 4S systems, use the rear-mount push-pull system with the steel

pushrod. If you are in doubt, we suggest using the pull-pull system.

Both types of installation are detailed below.

PULL-PULL Cable rudder servo installation. (If using the Rear-Mount rudder servo location, please

skip forward to that section)

Remove the covering over the control horn slot in the rudder in the location shown and install the double-

sided pull-pull control horn in the rudder with medium or thick CA glue. Remove the covering over the

slot for the cable to enter the fuselage, as shown.