3DHobbyShop.com Vyper 46" ARF 조립 설명서 - 페이지 13

{카테고리_이름} 3DHobbyShop.com Vyper 46" ARF에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3DHobbyShop.com Vyper 46" ARF 19 페이지.

Please examine the pull-pull system assembly diagram closely:

When attaching the servo connectors to the arm, do not tighten the nut fully, but leave it a bit loose so the

connectors can rotate freely. Use a drop of CA glue on the nut to prevent it from loosening in flight.

Start by attaching the cables to the pull-wire end. Crimp well, preferably by making creases in the crimp

tube with a sharp pliers or cutters, rather than smashing it completely flat. Apply a drop of thin ca to the

completed crimp to prevent it from sliding on the cable.