3DHobbyShop.com Vyper 46" ARF 조립 설명서 - 페이지 11
{카테고리_이름} 3DHobbyShop.com Vyper 46" ARF에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3DHobbyShop.com Vyper 46" ARF 19 페이지.
페이지 인쇄
11
Assemble the ailerons onto the wings, flex them up and down to check for free motion, and drip thin CA
glue onto each hinge. Allow to dry.
Remove the covering over the aileron servo openings and aileron control horn slots as shown. Mount
servo as shown.
Install aileron control horn into slot with medium or thick CA glue and assemble aileron pushrod onto
servo arm, exactly as you assembled the elevator control system. Be sure the 2mm nut on the control
horn is locked in place with CA glue.