Aluprof DC 448 Manual Pemrograman - Halaman 3

Jelajahi secara online atau unduh pdf Manual Pemrograman untuk Pemancar Aluprof DC 448. Aluprof DC 448 4 halaman.
Juga untuk Aluprof DC 448: Manual Pemrograman (4 halaman)

Halaman Cetak
Aluprof DC 448 Manual Pemrograman
DC 448 PROGRAMMING MANUAL
2.2. Setting of the timer
Programming of the timer can be performed only in 'MAN' mode.
If there will be a bigger interval during the programming than 10 seconds the timer will go from the setting mode out.
Hold the „SET P2" button for 2 second will
Hold the „MODE/K-" button for 5 seconds
The operation of the „UP" and „DOWN"
With the help of the „OK / K +" - button
switch the transmitter to the 'MAN' mode.
keys changes the hour settings
till the hour will blink
we confirm all changes
The operation of the „UP" and „DOWN"
Press the „MODE/K-" to confirm
The operation of the „UP" and „DOWN"
With the help of the „OK / K +"
keys changes the minute settings
keys changes the day of the
- button we confirm all changes
the minute.
week settings
We reserve the right to any technical change. Valid on 2019.03.13
3