Aluprof DC 448 Programlama Kılavuzu - Sayfa 3

Verici Aluprof DC 448 için çevrimiçi göz atın veya pdf Programlama Kılavuzu indirin. Aluprof DC 448 4 sayfaları.
Ayrıca Aluprof DC 448 için: Programlama Kılavuzu (4 sayfalar)

Sayfayı Yazdır

DC 448 PROGRAMMING MANUAL

2.2. Setting of the timer

Programming of the timer can be performed only in 'MAN' mode.

If there will be a bigger interval during the programming than 10 seconds the timer will go from the setting mode out.

Hold the „SET P2" button for 2 second will

Hold the „MODE/K-" button for 5 seconds

The operation of the „UP" and „DOWN"

With the help of the „OK / K +" - button

switch the transmitter to the 'MAN' mode.

keys changes the hour settings

till the hour will blink

we confirm all changes

The operation of the „UP" and „DOWN"

Press the „MODE/K-" to confirm

The operation of the „UP" and „DOWN"

With the help of the „OK / K +"

keys changes the minute settings

keys changes the day of the

- button we confirm all changes

the minute.

week settings

We reserve the right to any technical change. Valid on 2019.03.13