Blue Clean AR 1850 Petunjuk Perakitan, Perawatan, dan Penggunaan - Halaman 9
Jelajahi secara online atau unduh pdf Petunjuk Perakitan, Perawatan, dan Penggunaan untuk Mesin Cuci Tekanan Blue Clean AR 1850. Blue Clean AR 1850 16 halaman. Electric pressure washer
Halaman Cetak
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
• Make sure the "ON/OFF" switch is in the "OFF"
position. The power switch has international symbols
for 'on' and 'off': On (|) Off (O).
• Unwind the power cord completely and plug the GFCI
into a grounded 120 volt outlet.
• Turn on water supply at the faucet to completely
open.
• Release safety push trigger lock up and back into
trigger. While pointing the spray gun in a safe
direction, squeeze the trigger on the spray gun until
there is a steady stream of water, letting the water
and air out of the hose. Push trigger lock back down
to lock back into place.
95028_IM_ARBC_AR1850_EN_REV00_20181224.indd 9
OFF/0
ON/I
• Turn the power switch to the "ON" (|) position. The
unit will turn on for 1 - 2 seconds and shut off.
This is a normal function of the auto start feature.
Squeeze the spray gun trigger to begin pressure
washing.
• Begin power washing by squeezing the trigger on the
spray gun all the way into the handle.
• Release the spray gun trigger to stop the power
washer.
• Allow the motor to come to a complete stop before
squeezing the trigger again.
• Squeezing rapidly will cause the auto start feature to
miss an on/off cycle that may prevent it from turning
on while squeezing trigger after rapid squeezing. Use
slow deliberate trigger pulls to avoid such symptoms.
• Always test a small area to avoid chance of
damaging the surface.
OFF/0
ON/I
9
2018/12/25 下午3:58