Blue Clean AR 1850 조립, 관리 및 사용 지침 - 페이지 9

{카테고리_이름} Blue Clean AR 1850에 대한 조립, 관리 및 사용 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Blue Clean AR 1850 16 페이지. Electric pressure washer

OPERATING INSTRUCTIONS

• Make sure the "ON/OFF" switch is in the "OFF"

position. The power switch has international symbols

for 'on' and 'off': On (|) Off (O).

• Unwind the power cord completely and plug the GFCI

into a grounded 120 volt outlet.

• Turn on water supply at the faucet to completely

open.

• Release safety push trigger lock up and back into

trigger. While pointing the spray gun in a safe

direction, squeeze the trigger on the spray gun until

there is a steady stream of water, letting the water

and air out of the hose. Push trigger lock back down

to lock back into place.

95028_IM_ARBC_AR1850_EN_REV00_20181224.indd 9

OFF/0

ON/I

• Turn the power switch to the "ON" (|) position. The

unit will turn on for 1 - 2 seconds and shut off.

This is a normal function of the auto start feature.

Squeeze the spray gun trigger to begin pressure

washing.

• Begin power washing by squeezing the trigger on the

spray gun all the way into the handle.

• Release the spray gun trigger to stop the power

washer.

• Allow the motor to come to a complete stop before

squeezing the trigger again.

• Squeezing rapidly will cause the auto start feature to

miss an on/off cycle that may prevent it from turning

on while squeezing trigger after rapid squeezing. Use

slow deliberate trigger pulls to avoid such symptoms.

• Always test a small area to avoid chance of

damaging the surface.

OFF/0

ON/I

2018/12/25 下午3:58