Blue Clean AR 1850 Montage-, onderhouds- en gebruiksaanwijzing - Pagina 9
Blader online of download pdf Montage-, onderhouds- en gebruiksaanwijzing voor {categorie_naam} Blue Clean AR 1850. Blue Clean AR 1850 16 pagina's. Electric pressure washer
Pagina afdrukken
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
• Make sure the "ON/OFF" switch is in the "OFF"
position. The power switch has international symbols
for 'on' and 'off': On (|) Off (O).
• Unwind the power cord completely and plug the GFCI
into a grounded 120 volt outlet.
• Turn on water supply at the faucet to completely
open.
• Release safety push trigger lock up and back into
trigger. While pointing the spray gun in a safe
direction, squeeze the trigger on the spray gun until
there is a steady stream of water, letting the water
and air out of the hose. Push trigger lock back down
to lock back into place.
95028_IM_ARBC_AR1850_EN_REV00_20181224.indd 9
OFF/0
ON/I
• Turn the power switch to the "ON" (|) position. The
unit will turn on for 1 - 2 seconds and shut off.
This is a normal function of the auto start feature.
Squeeze the spray gun trigger to begin pressure
washing.
• Begin power washing by squeezing the trigger on the
spray gun all the way into the handle.
• Release the spray gun trigger to stop the power
washer.
• Allow the motor to come to a complete stop before
squeezing the trigger again.
• Squeezing rapidly will cause the auto start feature to
miss an on/off cycle that may prevent it from turning
on while squeezing trigger after rapid squeezing. Use
slow deliberate trigger pulls to avoid such symptoms.
• Always test a small area to avoid chance of
damaging the surface.
OFF/0
ON/I
9
2018/12/25 下午3:58