Flavor Burst CC8 Panduan Referensi Cepat - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Peralatan Makanan Komersial Flavor Burst CC8. Flavor Burst CC8 15 halaman.

CLR 2000 CC8 Cooling Hood Assembly

The Cooling Hood Assembly keeps the CC8 product ingredients at a managable temperature when external

temperatures may otherwise cause the ingredients to melt and clog the system. Use the following instructions to

install and maintain the Cooling Hood Assembly and follow the operation tips to maximize the effectiveness of

the CC8 system. For further information, contact your local distributor.

CLR 150

Power Supply Box

INSTALLATION OF THE COOLING HOOD ASSEMBLY

Determine which side of the freezer to mount the Cooling Hood Power Supply Box. The two mounting brackets can be

unscrewed from the back of the Box and reinstalled in the other set of screw holes so that the Box can be mounted on either

side of the freezer. Install the mounting brackets accordingly.

Clean and dry the area where the Box is to be mounted.

NOTE: ENSURE THE BOX IS MOUNTED IN AN

AREA WHERE SPILLAGE WILL NOT OCCUR.

ENSURE THE BOX DOES NOT COVER ANY AIR

VENTS THAT ARE CRITICAL TO VENTING THE FREEZER

REV040907

Flavor Burst

Installation, Operation Tips, Maintenance

Dehumidifying Canister

MIS 3157

CLR 100

Base Ring

LEFT SIDE

MOUNTING

CLEAN

Detergent

RINSE

DRY

Water

CLR 107

FAS 2091

FAS 2023

RIGHT SIDE

MOUNTING

Position the Box assembly in the desired mounting

position on the freezer and mark around the brackets

with a soft lead pencil.

™

CLR 151

Cooling Hood

pg. 1 of 3