3M Air-Mate PAPR 231-01-30 Petunjuk Pengguna - Halaman 15
Jelajahi secara online atau unduh pdf Petunjuk Pengguna untuk Produk Pernapasan 3M Air-Mate PAPR 231-01-30. 3M Air-Mate PAPR 231-01-30 17 halaman. Belt-mounted high efficiency powered air purifying respirator
Juga untuk 3M Air-Mate PAPR 231-01-30: Manual (2 halaman)
Halaman Cetak
CLEANING AND STORAGE
Follow the hygiene practices established by your employer for the specific contaminants to which you have
been exposed.
Do not clean respirator with solvents. Cleaning with solvents may degrade some respirator components
and reduce respirator effectiveness. Inspect all respirator components before each use to ensure proper
operating conditions. Failure to do so may result in sickness or death.
Cleaning
Solvents should not be used to clean the PAPR blower unit, battery pack or smart battery chargers.
Liquid solvents may chemically weaken the plastic. Use the following suggested procedures for
cleaning:
1. Wipe the PAPR blower unit, battery pack and smart battery charger with a mild cleaning solution.
2. Do not immerse the PAPR blower unit, battery pack or smart battery charger.
3. Properly dispose of used filters. Do not attempt to clean the filters. Dispose of the filter according to
applicable regulations
4. Disconnect breathing tube from the headpiece and PAPR unit. Flush breathing tube with mild cleaning
solution and soak as necessary. Flush with clean water and let drain until drippings stops. Immediately
connect breathing tube to an assembled PAPR unit and run system for a minimum of 1/2 hour with the
breathing tube hanging downward.
Never attempt to clean filters by knocking or blowing out accumulated material. This may result in damage
to the filter membrane allowing hazardous particles to enter the breathing zone, resulting in sickness or
death.
Storage
Store your respirator at room temperature in a dry area that is protected from exposure to hazardous
contaminants.
15