Ambient NanoLockit Manual - Halaman 2

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Perekaman Ambient NanoLockit. Ambient NanoLockit 4 halaman. Timecode + logging
Juga untuk Ambient NanoLockit: Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai dengan Cepat (20 halaman), Panduan Memulai Cepat (5 halaman), Tutorial (5 halaman), Panduan Cepat (2 halaman), Manual (19 halaman)

In this tutorial, we will show you how to timecode sync a ZoomF4 audio

recorder to an Ambient NanoLockit.

We will use the following gear: a Zoom F4

and a camera.

To timecode sync this setup, you will

need two NanoLockits and these two

timecode cables: the LTC-OUT cabel for

the Zoom F4 and the TC-IO-35RA accord-

ing to the camera.

Start the NanoLockits by pressing and

holding the power button for three sec-

onds.

The LED will flash green / red, which

means the LEMO timecode output is still

muted.

Press and hold the green button of one

NanoLockit for three seconds until LED

double-blinks green: This sets the time-

code and frame rate, wirelessly syncs all

other NanoLockits and activates all LEMO

outputs.

The NanoLockit always starts with its Real

Time Clock at last frame rate or at default

25 fps.

If successful, all units will flash green in

sync. Which means: they are ready to

sync other devices.