Ambient NanoLockit Manual - Page 2
Browse online or download pdf Manual for Recording Equipment Ambient NanoLockit. Ambient NanoLockit 4 pages. Timecode + logging
Also for Ambient NanoLockit: Quick Start Manual (2 pages), Quick Start Manual (2 pages), Quick Start Up Manual (20 pages), Quick Start Manual (5 pages), Tutorial (5 pages), Quick Manual (2 pages), Manual (19 pages)
Print Page
In this tutorial, we will show you how to timecode sync a ZoomF4 audio
recorder to an Ambient NanoLockit.
We will use the following gear: a Zoom F4
and a camera.
To timecode sync this setup, you will
need two NanoLockits and these two
timecode cables: the LTC-OUT cabel for
the Zoom F4 and the TC-IO-35RA accord-
ing to the camera.
Start the NanoLockits by pressing and
holding the power button for three sec-
onds.
The LED will flash green / red, which
means the LEMO timecode output is still
muted.
Press and hold the green button of one
NanoLockit for three seconds until LED
double-blinks green: This sets the time-
code and frame rate, wirelessly syncs all
other NanoLockits and activates all LEMO
outputs.
The NanoLockit always starts with its Real
Time Clock at last frame rate or at default
25 fps.
If successful, all units will flash green in
sync. Which means: they are ready to
sync other devices.