Ambient NanoLockit Руководство - Страница 2

Просмотреть онлайн или скачать pdf Руководство для Оборудование для звукозаписи Ambient NanoLockit. Ambient NanoLockit 4 страницы. Timecode + logging
Также для Ambient NanoLockit: Краткое руководство по эксплуатации (2 страниц), Краткое руководство по эксплуатации (2 страниц), Руководство по быстрому запуску (20 страниц), Краткое руководство по эксплуатации (5 страниц), Учебное пособие (5 страниц), Краткое руководство (2 страниц), Руководство (19 страниц)

Печатать страницу
Ambient NanoLockit Руководство
In this tutorial, we will show you how to timecode sync a ZoomF4 audio
recorder to an Ambient NanoLockit.
We will use the following gear: a Zoom F4
and a camera.
To timecode sync this setup, you will
need two NanoLockits and these two
timecode cables: the LTC-OUT cabel for
the Zoom F4 and the TC-IO-35RA accord-
ing to the camera.
Start the NanoLockits by pressing and
holding the power button for three sec-
onds.
The LED will flash green / red, which
means the LEMO timecode output is still
muted.
Press and hold the green button of one
NanoLockit for three seconds until LED
double-blinks green: This sets the time-
code and frame rate, wirelessly syncs all
other NanoLockits and activates all LEMO
outputs.
The NanoLockit always starts with its Real
Time Clock at last frame rate or at default
25 fps.
If successful, all units will flash green in
sync. Which means: they are ready to
sync other devices.