Floe VSD 5000 Manuale di istruzioni per il montaggio - Pagina 7

Sfoglia online o scarica il pdf Manuale di istruzioni per il montaggio per Attrezzatura per la nautica Floe VSD 5000. Floe VSD 5000 8. Pontoon guide-in/bunk
Anche per Floe VSD 5000: Istruzioni di montaggio (4 pagine), Manuale di istruzioni per il montaggio (12 pagine), Manuale di istruzioni per il montaggio (8 pagine), Manuale di istruzioni per il montaggio (12 pagine)

FOLLOW THESE GUIDELINES FOR USING AND LOCATING THE PONTOON BUNKS (FIGURE 2.4).

-THE WIDTH OF THE BUNKS SHOULD KEEP THE PONTOONS OFF THE CRADLE BEAMS.

-THE BUNKS SHOULD BE KEPT AS LOW AS POSSIBLE (NOT QUITE TOUCHING THE CLAMP).

-TO PLACE BUNKS, FIND CENTER BETWEEN PONTOONS AND CENTER OF THE BOAT FROM PONTOONS

AND TRANSLATE MEASUREMENT TO CRADLE BEAM TO DETERMINE CENTER OF EACH PAIR OF BUNKS.

-THE REAR OF A 21' PONTOON BOAT SHOULD OVERHAND PAST THE LIFT BY 3 FEET. FOR EVERY

ADDITIONAL FOOT IN LENGTH OF THE BOAT, IT SHOULD OVERHANG BY AN ADDITIONAL 6 INCHES

BEYOND THE REAR OF THE LIFT. THESE ARE GENERAL GUIDELINES THAT CAN BE ADJUSTED FOR AN

INDIVIDUAL'S CIRCUMSTANCES.

-ONCE BUNKS ARE IN THEIR FINAL LOCATION, TORQUE 3/8" NUTS ON CRADLE CLAMPS TO 35 FT-LBS

AND ½" NUTS ON CRADLE CLAMPS TO 70 FT-LBS (FIGURE 2.4).

FIGURE 2.4

SHEET 7 OF 8