- ページ 7

ボート用品 Floe VSD 5000のPDF 組立説明書をオンラインで閲覧またはダウンロードできます。Floe VSD 5000 8 ページ。 Pontoon guide-in/bunk
Floe VSD 5000 にも： 組立手順 (4 ページ), 組み立て説明書 (12 ページ), 組立説明書 (8 ページ), 組立説明書 (12 ページ)

ページを印刷する
Floe VSD 5000 組立説明書
FOLLOW THESE GUIDELINES FOR USING AND LOCATING THE PONTOON BUNKS (FIGURE 2.4).
-THE WIDTH OF THE BUNKS SHOULD KEEP THE PONTOONS OFF THE CRADLE BEAMS.
-THE BUNKS SHOULD BE KEPT AS LOW AS POSSIBLE (NOT QUITE TOUCHING THE CLAMP).
-TO PLACE BUNKS, FIND CENTER BETWEEN PONTOONS AND CENTER OF THE BOAT FROM PONTOONS
AND TRANSLATE MEASUREMENT TO CRADLE BEAM TO DETERMINE CENTER OF EACH PAIR OF BUNKS.
-THE REAR OF A 21' PONTOON BOAT SHOULD OVERHAND PAST THE LIFT BY 3 FEET. FOR EVERY
ADDITIONAL FOOT IN LENGTH OF THE BOAT, IT SHOULD OVERHANG BY AN ADDITIONAL 6 INCHES
BEYOND THE REAR OF THE LIFT. THESE ARE GENERAL GUIDELINES THAT CAN BE ADJUSTED FOR AN
INDIVIDUAL'S CIRCUMSTANCES.
-ONCE BUNKS ARE IN THEIR FINAL LOCATION, TORQUE 3/8" NUTS ON CRADLE CLAMPS TO 35 FT-LBS
AND ½" NUTS ON CRADLE CLAMPS TO 70 FT-LBS (FIGURE 2.4).
FIGURE 2.4
FIGURE 2.4
SHEET 7 OF 8