Compac WD500 G1 Manuale operativo - Pagina 14
Sfoglia online o scarica il pdf Manuale operativo per Carrello da esterno Compac WD500 G1. Compac WD500 G1 15. Wheel dolly
Mount cylinder E.
A
B
Remove transport plug A and mount the
plug with vent B.
(EN)
5374 WD500 G1 (EN).docx
Remove the screw and washer on the cylinder.
Place the cylinder in the chassis bracket.
Mount the screw and washer as shown.
Gently tighten the screw by hand; it is tightened
mechanically after the mandrel at the top is
mounted.
Remove the retaining ring at the top and pull out
the mandrel.
Place the cylinder's ram in the tower and push
the mandrel through the fitting.
Mount the retaining ring again.
Note: Now tighten the screw on the cylinder
using a 19 mm wrench.
Remove the cable ties locking the tower.
A
Oil plug B comes fastened in the illustrated fixture.
14 / 15
Knowhow is the difference
2020-01-24 R1.1 S1
B