Compac WD500 G1 Bedieningshandleiding - Pagina 14

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Compac WD500 G1. Compac WD500 G1 15 pagina's. Wheel dolly

Mount cylinder E.

Remove transport plug A and mount the

plug with vent B.

(EN)

5374 WD500 G1 (EN).docx

Remove the screw and washer on the cylinder.

Place the cylinder in the chassis bracket.

Mount the screw and washer as shown.

Gently tighten the screw by hand; it is tightened

mechanically after the mandrel at the top is

mounted.

Remove the retaining ring at the top and pull out

the mandrel.

Place the cylinder's ram in the tower and push

the mandrel through the fitting.

Mount the retaining ring again.

Note: Now tighten the screw on the cylinder

using a 19 mm wrench.

Remove the cable ties locking the tower.

Oil plug B comes fastened in the illustrated fixture.

14 / 15

Knowhow is the difference

2020-01-24 R1.1 S1