DSE DSEG8660 Istruzioni per l'installazione - Pagina 4

Sfoglia online o scarica il pdf Istruzioni per l'installazione per Controllore DSE DSEG8660. DSE DSEG8660 5.

DIMENSIONS AND MOUNTING

Parameter

Specification

248 mm x 182.6 mm x 45.2 mm (9.76 " x 7.18 " x 1.77 ")

Dimensions

220 mm X 160 mm (8.7" X 6.3")

Panel Cutout

Weight

0.76 kg (1.67 lb)

Operating Temperature with

-30 ºC to +70 ºC (-22 ºF to +158 ºF)

Standard Display

Operating Temperature with

-40 ºC to +70 ºC (-40 ºF to +158 ºF)

Heated Display

Storage Temperature

-40 ºC to +80 ºC (-40 ºF to +176 ºF)

NOTE: In conditions of excessive vibration, mount the control panel on suitable anti-vibration mountings

The module is held into the control panel fascia using the supplied fixing clips.

•

Withdraw the fixing clip screw (turn anticlockwise) until only the pointed end is protruding from the clip.

•

Insert the three 'prongs' of the fixing clip into the slots in the side of the DSE module's case.

•

Pull the fixing clip backwards (towards the back of the module) ensuring all three prongs of the clip are inside

their allotted slots.

•

Turn the fixing clip screws clockwise until they make contact with the panel fascia.

•

Turn the screws a quarter of a turn to secure the module into the control panel's fascia. Care must be taken

not to over tighten the fixing clip screws.

NOTE: A larger version of the Typical Wiring Diagram is available in the product's operator

manual, refer to DSE Publication: 057-323 DSE8660 Operator Manual available from

www.deepseaelectronics.com for more information.

Mains Parallel Controller