Attero Tech AXON A4FLEX Manuale d'uso - Pagina 8
Sfoglia online o scarica il pdf Manuale d'uso per Accessories Attero Tech AXON A4FLEX. Attero Tech AXON A4FLEX 13. Networked audio connectivity interface
Stampa la pagina2.2.2 - Independent VLAN Configuration
The Ethernet network ports can also be configured as
independent VLANs. This allows the A4FLEX to support
applications where the audio network and control network are run
in their own individual VLANs. "Ethernet 1" would always be the
audio connection while "Ethernet 2" would be the control network
connection.
6 - Independent VLAN Configuration
*Note: All Attero Tech products are tested using UTP network
cabling and it is recommended that UTP cabling be used when
installing them. STP cabling can be used for installation though
care must be taken not introduce grounding issues into the
system by doing so.
1315 Directors Row Suite 107 Fort Wayne, IN 46808 ⁞ (260)496-9668 ⁞ www.atterotech.com
2.3 – Audio I/O Connections
The A4FLEX features two dedicated audio inputs, two flexible I/O
that can be configured as audio inputs or outputs, and two
dedicated amplified outputs.
7 - Balanced Wiring Example
The audio inputs and outputs use a balanced connection. If
connecting to devices that have unbalanced connections, the
wiring should be done as follows:
8 - Unbalanced to Balanced Wiring Example
The amplified outputs are designed to drive low impedance 4 and
8 ohms speakers. The SPKR connections on the A4FLEX should be
wired direct to the speaker terminals.
NOTES:
* Make sure suitable speaker cable is used.
* The A4FLEX does not support bridging of the speaker outputs
Page 4