Apogee Symphony I/O Istruzioni e istruzioni - Pagina 3

Sfoglia online o scarica il pdf Istruzioni e istruzioni per Apparecchiature di registrazione Apogee Symphony I/O. Apogee Symphony I/O 9.

Pro Tools Native-HD

(Using single PCI card- not to be confused with ProTools Native)

✴ Software Release 2.1 or later must be downloaded from Apogeedigital.com and

installed. Following installation restart your computer.

✴ Power off Symphony I/O.

✴ Connect Symphony I/O to port 1 of Native-HD card.

✴ Power up unit. Set Symphony I/O to "Pro Tools HD" Audio Interface Mode (hold in

the right encoder to check and change if you need to)

✴ Verify that the Symphony I/O is clocked to internal and displays "INT" on the front-

panel.

✴ Launch Pro Tools (you should hear relays clicking from the Symphony I/O and the

exclamation mark icon on the front-panel should go away) and open the "hardware

setup"... click "default" just to double-check that all the i/o show up.

NOTE: Native-HD is compatible with ProTools 9 Intel Mac Pros only.

The information in this document is confidential and proprietary. Redistribution without consent is strictly prohibited.