DUSKWORK VCO V2 Manuale di costruzione - Pagina 2

Sfoglia online o scarica il pdf Manuale di costruzione per Unità di controllo DUSKWORK VCO V2. DUSKWORK VCO V2 7.

| DUSKWORK.NET | Self-Tuning VCO V2 Build Guide

Step 1: Check the version of board that you have. The version number is found at the bottom

of the main PCB with all the components on. This build guide is for V2 only, check website

for other revisions.

Step 2: Solder the surface mount 3340 VCO chip into U6. Pin 1 is marked by a white dot at

the top left of the chip (you can just see it below the "R" on this one). Make sure to get the

orientation correct on this. I used the Alfa AS3340D (SOIC-16) version on mine. Make sure

to use a small soldering iron on this to avoid making shorts between pins!