CB2 RODNEY Istruzioni per il montaggio - Pagina 2
Sfoglia online o scarica il pdf Istruzioni per il montaggio per Arredamento per interni CB2 RODNEY. CB2 RODNEY 5. Tall chest
Stampa la paginarodney
TALL CHEST
middle
panel
left side
panel
With the assistance of another adult, carefully
place left/right side panels and middle panel
onto clean padded surface as shown. Attach
middle panel to left and right side panels with 4
brackets, 4 flat washers, 4 spring washers and
4 large bolts, using an allen wrench. Do not over
1
tighten the bolts.
B
bottom panel
A. Slide back panel into grooves of left and right side panels.
B. Fit pre-assembled dowels of left and right side panels into
corresponding holes of bottom panel. Secure left and right side
panels to bottom panel with 4 flat washers, 4 spring washers
and 4 small bolts, using a phillips head screwdriver.
C. Secure back panel to top and bottom panel with 6 small
3
screws, as shown.
Made in Vietnam - r06
NOTE: Do not over
tighten the bolts.
right side
panel
NOTE: Make sure left
and right side panels are
assembled with grooves
facing back as shown
C
A
back panel
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Position top panel as shown. Fit pre-assembled
dowels of left and right side panels into
corresponding holes of top panel. Secure left and
right side panels to top panel with 4 flat
washers, 4 spring washers and 4 small bolts as
2
shown, using a phillips head screwdriver.
B
C
top panel
Attach 2 legs to assembled unit
by turning each leg clockwise
4
as shown.
leg
Page 2 of 5